Feel free to mute. I'll caption everything important.

I removed one repeater - it was too slow.

I recommend making the jumpcutted changes yourself before doing what I'm about to.

This is where the minecart will disappear again.

While a minecart is on the detector rail, these tracks will turn away from oncoming carts, so they continue straight.

This NOT gate is what makes that happen. The redsone wire goes from the detector rail and turns off the torch

When the torch is turned on, the track above it changes direction.

Minecarts come up this ramp, hit the chunk and drop onto the detector rail

Thus, turning the track back away from the next cart.

This ISN'T the way my original one works - it's much simpler.

Having a torch under the rail is much nicer than using two more pistons.

But I'll show you how I did that too, if you want - leave a comment.

I'm over here to show you that since I had to put in a repeater so all the ramps got powered...

I had to add one extra repeater to the first ramp's pistons

So that minecarts don't catch up to each other or land on a non-flat track.

I say here that I'm going to plce a repeater, but I don't, so one of the pistons doesn't actually work later on. Easy fix.

Fixed!

Please like and subscribe for more tutorials. Also, comment, tell me what you liked, what you didn't, how I can improve and what I...

... should do next!