Today I'm going to talk about installing and removing the 5C Collet adapter

This is the 5C Collet adapter it goes...

...in the spindle nose of the chuck.

It's got a key in it, that's what locates...

...on your 5C collets, Ok? It slides in...

...locates off the key.

So seeing your collets can only go into this

...collet adapter one way, if you go to use an emergency collet or a soft collet...

...like this,

but it's also got the key in it...

you're going to want the insert...

...to go in and out of the machine the machine the same everytime

so anything machine in the insert,

...is gonna repeat. Now it's all going to run pretty close because everything is ground and polished.

everything is going to run pretty good but you'll get the most accuracy

and the most repeatability...

if you put everything together and take it apart the same way every time.

so this doesn't have any marks on it yet.

We put a black mark on here

when we put the 3 Jaw chuck on

and we'll just line this key up with this witness mark.

That we had for the three jaw chuck.

Then just give it a tap to send it home.

as you put a collar

and drought uptake withdraw to did

it will make sure that college editors your

said so you're not sure you got in there

hallway as long as you got it pretty so when you draw it up

play with the Droid 2 in Wilson

go about their just a coherent buyer

you can use a steel bar for a minute or so

you don't mark things up as much the closer you get to the editor

you spill or the square it's gonna ask that instead

you need to see it here you know

day more would be

that's a you install and remove the calendar

if you have installed if you don't want to keep looking to see if you got it

installed a key way

you could but it'll do one faces a dremel tool awesome

for everyone here about this a little research you know

got it or hated the way he would be so repins

less variables better