we open a new file. Then from the following, we choose the first one; part. The plane we

use is the front plane. Select front plane, and then go to sketch. From sketch, go to

centerline. Draw a centerline, and then go to line. Draw a sketch with line that look

like this. Then go to smart dimension, and from this point to this point type 85 mm.

From this point to this point, type 5 mm. Then from this point to this centerline, type

5mm. Then from this point to this centerline, type 4mm. Check it, then go to sketch fillet.

This point will need to be sketch filleted. Click on it and type 10mm. Check it, then

go to offset entities. Select all sketch, and type here 1mm because 1mm is the thickness

of our tweezers. Check it and then go to line, we use line to close our sketch. Check it

and then go to features, extruded boss base. We type here 4mm, check it. And then go to

top plane. When you selected top plane, go to reference geometry plane. We make a new

plane. Type here 0.5mm, flip it; look like this. Check this, and now new plane is selected,

go to mirror, features to mirror, we mirror this feature. Check it, then right click on

the plane 1 go hide. Now we need to do some fillet and chamfer, go to chamfer and type

0.5mm, let it be 45 degrees. This edge chamfer, this edge, this edge and this edge. Check

it and then go to fillet, type here 5mm. Go on this edge, this edge, this edge and this

edge. Check it and then go to top view. Select this side of tweezers, and go to sketch. Draw

a line, and go to smart dimension. From this line to this line, type 2mm. Now go to 3 point

arc, this point, this point and this point. Then go to trim entities, trim to closest

must be selected. Trim this one, and then go to line to draw sketch like this. Then

go to features, extrude cut and check it. And for that, we will give it some appearance.

I don't know, polished steel. And we have our tweezers in Solidworks, thanks for watching.