You might not remember the name, but you'll definitely remember the flip up camera.

It's the one that swivels out of the phone like some kind R2D2 accessory.

We've done the durability test and we know the camera hinge is secure and the motor is

rated for 100,000 flips.

But in order to see how it's all put together and learn how it works, we're going to have

to review it from the inside.

It's time to teardown the Zenfone 6.

Let's get started.

[Intro]

The Zenfone 6 is built like most other glass and metal smart phones with a large glass

panel on the back held on with adhesive.

There's no water resistance rating on the Zenfone 6, so I assumed it would be easier

to take apart, but I was wrong.

The adhesive holding the thing together is incredibly goopy and strong, and really hard

to slice through.

But I eventually managed to make it happen, and I removed the glass.

There is one long fingerprint scanner ribbon attaching the back panel to the phone still.

I'll pop off that fingerprint scanner from the glass and set it off to the side.

You'll also want to watch out for the fragile Google Assistant ribbon cable that's super

close to the edge of the phone.

I went ahead and accidentally on purpose sliced mine in half as an example of what not to

do and what you should avoid.

The phone should still work though, even if I did kill the assistant.

There are 7 Philips head screws holding down the black plastic plate, then I can unsnap

the fingerprint scanner ribbon and lift off those plastics.

The NFC coil comes off as well.

I thought at first this might make a cool looking transparent phone, but then I changed

my mind, mostly because the majority of the flippy camera is hidden underneath the metal

camera housing and would not be visible in a clear phone.

Let's take a closer look.

I'll unplug the battery from the motherboard for safety since we do want this phone to

turn on again someday.

And I'll grab the singular battery pull tab down here at the bottom.

But then, without even pulling, the battery falls away from the phone basically all on

it's own.

That's a pleasant flaw in the assembly process for me.

Thumbs up for an accidentally too easy battery removal.

The Zenfone 6 has a massive 5000 milliamp hour battery, which is twice the capacity

of the iPhone XS.

You can see the two pretty worthless battery adhesive strips down here pretending to do

their jobs.

I'll unclip the two extension ribbons like little Legos, then the metal camera housing

up here at the top is held in place by 4 more screws.

Two additional screws already got removed with the back plastics.

Once those are out, I can gently lift away part of the metal structure from around the

top of the camera and I can slide the little edge of the bracket out from underneath the

motherboard.

Even with that support bracket now gone, the camera is still solidly in position.

We can see a bit more of the motor and gear as the camera flips back and forth.

No long stepper motor shaft this time around like we've seen in some of the pop up camera

phones.

The Zenfone 6 has just one gear going straight from the motor to the camera.

The camera control ribbon connector is also very different.

It's not like the little Lego style this time around.

I'll remove the one motherboard screw and disconnect the 3 additional ribbon cables,

and two more wire cables, and then lift the motherboard out and away from the frame, revealing

yet another motherboard like some kind of high tech Oreo cookie with pink frosting inside.

There are two different motherboards.

I'm not sure what the overall goal with that thermal paste is though.

Each motherboard is heating up and transferring the heat right back into the other motherboard.

I'm no expert, but using functional motherboards as heat sinks seems counter intuitive.

There are two more screws holding down that flippy metal camera unit bringing the total

up to 8 screws.

Then I'll detach another one of those strange connectors, and after a bit of shimmying and

unplugging the motor connector, the whole camera contraption can come out of the Zenfone

6.

It looks like these odd connectors can be unplugged, but the appear to be a bit more

fragile and require more finesse.

Not a huge fan.

Either way, the camera is out now and we can get a close up look at the attached motor.

Positioned off to the side, it has a direct connection with the hinge of the camera.

The brackets that secure the camera require 8 different screws, which I imagine is what

kept the camera so structurally solid during my durability test.

Let's take a quick look at the bottom motherboard.

The dual SIM and SD card slot is on the lower motherboard, with a circular white water damage

indicator next to the opening.

The loudspeaker is down at the bottom of the phone and has 6 screws holding it in place

over the lower electronics.

And once it's removed we see another water damage indicator on top of the headphone jack.

There is one screw holding down the charging port board, along with one more large Lego

style ribbon connector.

Then the charging port can lift up and out of the phone.

The USB-C charging port does have a black rubber ring around the tip to help cushion

the port and provide some water resistance, but as a whole, the phone is not water resistant

at all.

The front screen is permanently glued to the metal housing like we've seen in a lot of

other glass and metal phones.

It can be replaced, it's just difficult.

It's time we get everything situated back inside of the Zenfone 6 so I can clean up

the mess I made with all the internal guts spread out everywhere on my desk.

Before putting the motherboard sandwich back together, I do need to clip in the strange

camera cables that Asus is using.

Still not a huge fan.

They don't slide in easily like the Lego style ribbons, and it makes the whole repair much

more difficult.

Finally, after hopefully getting it clicked in, I can put the Oreo motherboard halves

together with the strawberry frosting in the middle.

Then I'll get the black camera cable plugged in, along with all the other more normal Lego

style connectors for the top motherboard.

The metal camera bracket gets secured onto the camera housing with it's 4 remaining screws

holding it in place.

Then the battery can get set into the phone and plugged in, along with the fingerprint

scanner and back plastics.

The fingerprint scanner gets placed directly back into the rear glass panel, and I can

set the whole thing back down onto the phone.

And luckily everything still turns on.

Overall I'm a fan of the Zenfone 6.

I like seeing phones do new and unique stuff.

Yeah, the motherboard sandwich is kind of strange.

We should watch that for overheating, but the internal camera and bracket both look

pretty solid.

I'm not a fan of those camera connectors though, as it appears my camera is malfunctioning

at the moment, but at least the phone itself still works.

You win some, you lose some.

It was still worth it to see the insides.

Would you rather have a phone with a flip up camera, or a pop up camera?

Let me know down in the comments.

Come hang out with me on Instagram and Twitter.

Hit the subscribe button if you haven't already.

And thanks a ton for watching.

I'll see you around.