But it's not totally ready for painting because what good is a frame, arms, kid, If you're not gonna customize it, they're made for customizing.

So we gotta customize this a little bit.

So I've been rummaging through all the different stuff that I have here trying to figure out what don't want to do with this because there's a lot of different ways that you could go.

So I think I'm gonna go with this.

Here is the extend arm 0 to 4 base largest.

So cut list, obviously just a variation of the baseline.

So this stuff will work with this.

Now, I'm not going to use all of this stuff.

Do you have a specific plan?

I've not done an actual review on this product.

If you guys would like to see a review just specifically dedicated to this extend arm set, well, let me know, and I can do that for you guys. 00:00:59.740 --> 00:01:7.770 But basically, it's just a set of stuff the year that you can attach onto the base lard in different ways so you can attach all this stuff around on here. 00:01:7.770 --> 00:01:14.300 It's got a new part for the chest, new part for the head in these parts, attached onto the legs and onto the shoulders and onto the sides skirts.

Or you can make them as just these two big giant shields like that.

So you've got some different options that you can make with that.

So there's big shields are actually pretty cool, actually, kind of quite like those.

But that's not what we're gonna do with these.

Here's the illustration.

There sickens me a little better.

The new parts there on the front of the crotch, that's front to the chest, the head.

And then, like I said, other external parts about what I want to do with this design here.

I like the legs just as they are, and I don't really want to use the parts on the lower leg to bulk out the lower legs like that.

But I do want to use these kind of thruster binder kind of parts there on the top half of the body.

So basically, I want to include these parts, your own, the shoulders on the side skirts, and then probably this part here for the chest as well.

Maybe not the head. 00:01:57.120 --> 00:02:0.140 I'm still on the fence about that, but I don't think I want to use those head parts. 00:02:0.240 --> 00:02:6.010 What I am thinking I do want to use the is just the original base lard beef in, which is just an extra part here for the cut list. 00:02:6.010 --> 00:02:7.590 So no, I guess not defend. 00:02:7.590 --> 00:02:8.790 But this part for the head. 00:02:9.070 --> 00:02:16.360 So where the Cutlass just has this one antenna here on the side, this will give it this the fins on the top on the two sides of the head.

So I think I'm just gonna use that I don't still have, like, the sleek, thinner legs without bulking knows at all, and we'll just bulk out the top half.

So he looks like he's like men like super high speed and the other thing of the leftover parts here that want to use the cut list has these knife feet, which I'm not really too big into.

But you do have the beat part from the original baseline, which is just like a little bent there on the front of the foot.

So that's what we're gonna use instead.

So kind of my goal for this is I wanted to look like it's meant for, like, really high speed assault.

So I just want to give it just a regular event.

Feet doesn't need the swords on there.

And then just the extra binders here for high speed movement on the shoulders on this side skirt area are here.

But then we need a weapon as well.

And I was really on the fence about that. 00:02:59.050 --> 00:03:0.360 If I wanted to like high speed us all. 00:03:0.360 --> 00:03:8.010 It seems like maybe it could be good for, like, a melee weapon, like just a quick assault go in and just like you said, mainly weapons to take our enemies. 00:03:8.250 --> 00:03:11.160 But I did want to just stick to a gun.

Now the rifle that's included with this is pretty simple, pretty basic.

And so no, not thinking.

I want to stick with this one.

I did have an idea of maybe just adding extending a tube for, like, a longer barrel out the front of this.

Just modifying this little bit.

But I think coming we just keep this and modify that meeting for some different kid.

What I want to use with this, I want to use this MSG modeling support goods, a freestyle gun now asked, you got that?

Might be a little strange, as you guys are seeing this.

Now, you've already maybe seen the review of this.

I'm filming this and a little bit different order.

I'm gonna do, like, a review video for this set separately and then use it here with biscuits.

So you guys have already seen this actually already built and reviewed.

But now I'm going.

This is what I'm actually using for this kid.

So here on the back, you have this part that kind of just plugs onto the back there. 00:03:59.080 --> 00:04:0.450 I'm just gonna replace that. 00:04:0.640 --> 00:04:10.810 Take that off there, and that's what we're gonna plug the tank onto the back here and then they'll go around into the hand for just holding the rifle in the hand so it will be connected via the hose around there.

I think that should work.

Hopefully, there won't be too much in the way of the binder parts there from the extend arms.

But let me just get this stuff built up, and then we'll try some test fitting, see how it's gonna look, and then we'll go from there.

Okay, so after much deliberation about how to exactly do this taking parts off, putting parts back on again, here is what I've come up with.

And I think it's looking pretty cool side, other side, bolt up.

Basically just the top half year.

Uh, and then after putting on the parts on the chest and the head, it was taking those parts on off, on off.

I couldn't decide without those parts on.

It definitely doesn't have quite the book, and I quite the extravagant look to it.

But I thought, Hey, this is frame arms And like one thing that you do see with a lot of custom frame arms is that they're just decked out with tons of stuff on it.

So I thought, All right, let's just do it. 00:04:58.550 --> 00:05:4.640 This is do it big and put tons of stuff on this, but still want to keep the legs there as they are and then also notice. 00:05:4.640 --> 00:05:7.910 I put the parts that are meant to go on the legs here on to decide the arms. 00:05:7.910 --> 00:05:11.130 That shield, I thought those look pretty cool as shields there on the arms as well.

I like extra shields slash alternative of booster units there on the arms as well.

So those are pretty cool.

Let me just show you.

Just so you guys can see also, for example, what it looks like without the chest and head parts on there.

Yes, There you go.

So I think it does look pretty cool like that as well.

Honestly.

And I did put the base large part on there for the top of the head.

And then the yellow chin piece is part of the extend Arms said that's a kind of a little bit different shapes.

Gullikson Extra kind of bull crap Coming armor.

They're on the chin piece there as well.

So I actually really do like it like this as well.

And then without the shields on the arms as well, it has the look of just the four boosters on there, And I think that is also a really cool look.

But like I said, I thought, you know, if we're gonna do it, we're gonna do a big and so we're just gonna put all this stuff on here.

But I do still have some stuff left over. 00:05:59.700 --> 00:06:2.090 Just the other set of leg are merciful. 00:06:2.090 --> 00:06:3.110 End up using that for this. 00:06:3.110 --> 00:06:5.340 I'll just keep that forced from their custom built later. 00:06:5.340 --> 00:06:10.680 And then there was two of this kind of thruster unit thing here.

This one is one is supposed to go in the front of the crotch here, and I didn't want to do that, but I was thinking about different ways to use this on, like the back of the legs.

Then I thought, No, I already set myself that didn't want to put anything on the back legs.

But then I realized I'd put one here on the top of the backpack or just like the back of it here, and actually fits on there without having to modify anything because there's a little notch there for that.

Just here on the back.

This one will just fit up onto the top of their like that for just one more little thruster there on the back.

Now, as for as the tank here, the energy tank, I will have to modify that a little bit.

I'll just have to drill a hole down here.

Uh, this is two male pigs.

That's not gonna work.

So I'm just gonna cut off that pay and get rid of that, and then just drill a hole set.

This one can drill down into their like that.

I'm thinking, although I was also considering maybe putting this here on the side of the leg like that, which I do think does look pretty quiet like the, uh, asymmetrical look of just having that off to one side like that, just to kind of go with the rifle in hand on that side.

So I'm not sure I'm still considering that on then this also.

As you can see, I didn't just change all the parts for the feats just with the regular base, large events there for the feet, as that is pretty much it for just the general construction things that just basically that everything's all set.

How I think I want this.

I just need to decide about that energy tank for the rifle, and then I probably won't use the rubber hose for that.

I'll probably just go for some other sort of spring or something or just wire before that.

And then what I need to work on now is basically some see mine removal on these parts.

The shield parts and new booster parts added on there.

They all have seams on there.

So Steenland ruble on those parts, a couple of seems on the actual get needs.

Some seem like removal work on.

And then we're also just going to work on. 00:07:52.330 --> 00:08:4.990 Adding some details in the next video is gonna be another work in progress, you know, before we get to the actual painting and we'll probably never know, Maybe talk about it a little bit about the painting process is, well, choosing some colors for this because I actually really like the colors that this just is straight out of the box. 00:08:4.990 --> 00:08:7.630 I think the dark blue extend arms parts work really well. 00:08:7.630 --> 00:08:9.960 It's just like added parts onto the color's color scheme. 00:08:9.960 --> 00:08:12.970 But we will do a custom color scheme for this different from what you see here.

But a very likely will be something similar in terms of its tone to what you see here like this.

It's actually quite like that s so in the next video, we'll just kind of work in progress, getting it just doing the last come preparations of steamed lemon rule.

See mine removal on that and then also just modifying this with some detail up.

So we got this here that I need to try out his B V spin mold tool here from God hand.

And it's really cool, basically allows you to drill a circular hole.

And it's not like a normal drill.

Well, it'll be down at a point, but it drills a flat hole.

Then you can set a circular piece of photo down in there to add a little bit of details.

We're gonna have some detail to this by testing out this tool here the god hand spin mold, and so that that'll be in the next working parts video. 00:08:58.310 --> 00:09:1.680 Stay tuned for that coming up very soon, guys, let me know your thoughts and opinions on this. 00:09:1.680 --> 00:09:2.860 So far, How's it looking? 00:09:2.860 --> 00:09:4.100 I think it looks pretty cool. 00:09:4.100 --> 00:09:5.460 I'm pretty happy with this. 00:09:5.460 --> 00:09:6.060 Pretty excited. 00:09:6.060 --> 00:09:7.250 So thank you all for watching.