There you go.

How is it going, guys?

Give me a moment.

As I'm just getting everything set up.

You're just getting the camera set up.

As you can see, it's looking Ah, little bit.

Not so good at the moment.

So hang on.

Just sick.

What the That looks about, right?

I suppose.

And then Okay.

I think that'll work for now.

May have to adjust that.

We'll see how it goes.

Are you guys all doing?

I know it's been Ah, little while the last dream was the charity stream.

So just once again, I want to say thank you to everyone who came out for that.

Ah, hang on.

Just a moment.

Texting with my mom.

Okay.

All right.

So excuse that for a moment.

Uh, yes.

Today we've got two kids were gonna build because last week I was planning on doing after the charity stream.

Later on in the week, I was planning on doing a couple of live streams, but just because of the schedule and my son still, just today he started going back to like his school, like, full time, but because of Corona virus over here Last week was just kind of The schedule was kind of crazy.

I couldn't really fit in or make time to do live streaming last week.

So here we are.

Should have some good ah time this week to live stream a couple of bills with you guys were doing these couple bills today.

The goof custom and the old Dora Dotrice.

I keep wanting to sail door a brute, but we already did that one.

Theodora.

Doc Triscuit eyes really super simple and really shouldn't take much time at all to build that one, so that should be easy enough.

All right, let me see here.

I just want to get that Ah, the problem.

My lighting here, Uh, like the past week and 1/2 or so, Like all everything's been going wrong with my lighting.

Uh, first, my big light, this ring light that I use, like for reviews and stuff the drive pod on it, like the fastening bolts or screws like tightening screws on the tripod to raise it up and down for this light.

Uh, both this screws and I guess they're stripped or something.

The nuts, I should say I don't know.

Whatever.

Anyway, they're strips.

So like it, no matter how much I tighten it and then it just goes passing.

It just doesn't work.

So I can't raise that up and down.

Ah, and then the light up above here went out and is still out.

So that's why I'm kind of a problem lighting this area here because the light up there is out.

Uh, and Joel Whisper, thank you for your support.

Their over on YouTube.

I'll get around to saying hello to everyone here in a moment.

Yes, to the light up there is out.

And that's it's an L e d lamp.

Ah, so I don't know what the problem with that is.

I guess it's just broke.

I don't know.

Uh, so you can change libel.

But then this light here, the label went out and that was easy.

Just got a new light bulb change that.

But for some reason, like in my lightings, all cursed these days, so Ah, yeah, without that overhead light, it's gonna be a little bit trickier to light this building area here.

But hopefully should be okay.

Ah and Jaqen, thank you for your super chat there as well.

So are you?

Ah, Were you painting an RG sasa be in the back room.

Another video?

A news on that?

Yes, I am in the middle of painting RGs house to be actually, all of the based painting is done.

Uh, I just have to I'm now just kind of going ahead with a clear coating gloss coating some of the parts and then so I could move on with the ah detail painting and penalizing and all that stuff.

So, yeah, that's Artie's has to be something I'm working on for a commission.

I am doing a work in progress Video on that, though.

You guys.

So the work in progress video will probably come a little bit later if you have a pretty simple one because I'm not really doing anything to anything too special with that.

It's just ah, custom paint job also.

What ps I do you prefer for airbrushing?

I just got in the water eclipse.

I I based on what I know, other people spray I spray a little bit lower than what other people do.

I think most people spray like between 20 and 30 I think, but I usually spray probably more closer to around 15.

I don't know.

It just feels more comfortable for me.

Like 20.

And anything over 20 just feels too crazy.

Like I'm just spraying way too much.

It's just too hard.

I don't know.

Ah, but just test to see what's comfortable for you.

I mean, as long as you're getting good results, that's what you need.

You can go too low, because then the U the paint finish will not be looking very good.

But, uh, you want to go too high, because then you'll just be like blowing your part away.

Uh, and also kill Kill Spawn.

Seller.

Sorry for probably butchering your first and last name there.

Apologize for that.

But thank you for the super chat and just want to say hi and shot up.

I appreciate that.

Uh, shut out to you as well.

Thank you.

Ah, and P s Is he home, love?

Yes.

Thank you.

I got the cool awesome Z on kid here to build today.

Ah, all right.

And Patrick has gone.

I want a two point OMG goof customs So bad.

Yeah, I wish that band I would make a, uh, 2.0 goof custom based off of the two point of goof.

It will be nice.

And I agree.

Maybe someday Bryant of being like a pea Bandai thing like, uh, like they've done with, like, the watch the Watch Kai and like the, um uh What's that?

The Rigas the custom, Those gifts that have just come out as as p.

Ben back, It's probably what will happen ultimately, if they were to do that these days, I don't know I could be wrong, but let's see.

Uh, all right, that's brighten things up a little bit.

Turn the brightness down because the manual was looking blown out when I was using that, for example, but now that the actual parts it's not quite so bright.

Uh, also Buffalo Jack And who's watching here on Twitch?

Gonna meet them Oak Tree?

Ah, I run a dol, I think maybe Striker How pizza rolls.

I guess Imagination made a PG, says B.

You know everyone's waiting for that for the pg knew to come out some day.

And, you know, if Ben ever made a PG knew, then I'm sure everyone's gonna be wanting a PG sasa be because, uh, after the PG Unicorn came out then everyone was craving a piece, a non Jew.

And personally, I think I've mentioned this maybe in a past video before.

But if there was any other PG, too, I mean, if I could have any staying with the next PG ends up being, I would be cool with a PG.

It's 100.

That'd be pretty cool.

It would be huge and expensive for sure.

I almost forgot.

This poly cap in here says.

I just mentioned earlier that the El Dora a doctor's kit is very simple, but the diskette as well give Custom HD also relatively simple h g k here.

But it looks quite solid.

Just based on kind of like my first impression of the kit.

Uh, when I was unboxing the kid, I was thinking that it really reminds me a lot of these are code two F two h g kit, and I think they came out around the same time.

I've been checked yet to be sure, but I think if I'm right about that, the problem came out around the same time, and, uh, so that's why they look kind of similar now the not what is in there sharing any parts because the designs are so different that they wouldn't be able to actually share any parts.

But just the way the parts look.

And just like the way that kid is engineer looks very similar.

Uh, I think to his architect have to, So ah, art do.

Ah, since the charity stream last week, I have left the left.

Some of the stuff are here on the screen.

Also left the alerts on.

I don't know if you guys think I should do anything with Hillard's Taylor them a little bit more because there's still, like alerts going off for, like, people liking and sharing the stream and stuff like that.

But if it's like too much alerts going on for you guys, they keep popping up, and it's like, annoying anyone.

Let me know that could be turned off.

Some of those, uh, don't keep the alerts on for people who are, like, using the super chat and stuff.

All right, so we got all oh, actually supposed to put the backpack on the body first before I attached the thrust of bells.

Well, I'm gonna work out just fine.

That just goes on there and I got this poly cap double bulge right there for the neck.

And these little guys go over the ball over the wooly caps here on the shoulder.

You're supposed to put them on later in the construction.

But I went ahead and pulled them out to just put together with the body here.

Everything you put them on later, once he actually are putting like the arms on the body once all the upper upper body is all done by.

Yeah, uh, definitely gonna want to paint in some silver.

Something on the back side of that clear orange parts.

That's a little more appearance, but the clearance part there on the chest does look nice.

Not like almost no service detail on these parts.

So not gonna have a ton of service detail, but yeah, Still, I mean, I think just the look of this kid is really nice compared Well, uh uh well, compared to you, But, I mean, just, uh yeah, compared to the mg.

And it's not too often that you can say this, but there are certainly some cases where the H G is actually nicer than the mg.

And this is one of those cases where I don't necessarily think mg is bad, but the H G is nice.

I think it's probably just more solid kid in general.

And also, uh uh, um or sell it and the proportions are better.

That's I mean, it looks it looks better.

Just the proportions.

The design.

Uh, it looks better, I think.

So.

You got piping part here which is supposed to go in like that, and then bring that around.

It seemed like with the origin kits, Where does you've got, like, some kinks in the pipe there.

So that's where you to bend it.

Uh, not too bad.

Not a bad option for this.

Then it was Just leave that now like that for the moment and take this part.

I want to hear yesterday, yesterday or the past week in any way.

Some at some point during the weekend, a some point during the weekend, my wife and I decided that we wanted to, uh, rewatch all the Marvel movies in chronological order.

So we started off with, uh, kept in America last night.

And so that means we've got what, 16 17 more to go to watch them all But for whatever reason, we just thought, Yeah, it's just for fun.

I guess that'll take a for, like, a month or so.

Uh, hello from Shoreline Washington.

How's it going, Mike?

I hope you're right there in Washington.

As I've heard, I haven't been keeping up with the new super Well, what's everything going on?

The US that there's a lot going on in the U.

S.

But Washington is has been hit particularly hard with kind of Corona virus, So hopefully your area is pretty safe.

You know, the good thing about the United States is that it's very spread out, right?

Uh, hey, good.

I mean, just there's a lot of physical, like natural space where is, like, here in Korea, Uh, here in Korea.

I mean, it's a very small country, so everything and everyone's pretty closely packed together.

That's kind of like a challenge that we have in the U.

S.

I mean, at least you like if, for example, there's a Corona virus hot spot in one city, the next city is like miles and miles away, all right, so it's probably less.

I'm sure there's still a lot of it, but there's probably compared to here.

I'm sure there's probably less like intercity inner city travel here.

Like it was very easy to spread, like two different cities.

Because people just traveling to different cities all the time.

It's not that far in between.

Ah, Pennsylvania.

Shut down most businesses now, Kelso.

Ah, yeah.

I'm from Illinois.

And that's where my parents are still living there in Illinois.

And yeah, Illinois is is pretty shut down as well.

Um, I think I was supposed to have, uh not that this and not that there s That's why I didn't have that gold right there.

Should pay attention to the manual.

I forgot this.

Little Polly kept in there.