So I said it in a review that I was going to do an AMG themed build around the radio on seven.

Very similar to how I did with the Titans are T X and the last, like themed AMG build I've done was actually threaten upper.

We just hit.

It still works.

So back there, that was a showpiece man.

We put a lot of time and effort into that.

I don't know if I'm going to go quite as extravagant with this one, but I want you guys to be a part of this.

I kind of want some of the inspiration behind what you guys would do because I'm not the most creative person.

Believe it or not, most of the things that you see happen around here happened by accident or just because I'm stupid and didn't really think about it.

And it worked out in the end.

So that's why I need your guys is help.

Today.

Sponsor is cable mod and their new website builds dot g will be taking this and kind of putting it up on there.

So basically builds.

Dougie, if you're not aware, is a new website where you can upload pictures of your build, you can list out all the parts you can go and check out other people's builds and see what their inspiration and stuff is.

I mean, it's not the first Web site of its kind, but it's the 1st 1 for cable mod.

And the interesting part is they have regular competitions where he just by having systems up there and being registered user, you can qualify for various cash prizes, parts sponsored giveaways, all sorts of stuff.

So it's free to sign up.

There's a link down the description below.

You guys can go and sign up and also fall along with this bill because I'm gonna be taking the progress of this and putting up there because each build also has its own comments section.

You can actually going to make comments on the build.

So rather than commenting on this video with build ideas, because, as I said, I'm gonna be reaching out and asking you guys what you would like to see this kind of turn into overtime.

This is gonna be a multipart er put the comments on the profile for this build, not this video.

So it all stays in one neat, orderly place.

So, yeah, what kind of also putting skunk works up there?

We actually put the black or the gold and white build up there as well.

That was kind of like me testing out, and it's pretty cool.

It's also important to get as many people signed up on there is possible, because the database will grow as more people enter parts and if their parts and on the database, you could add it and they'll verify and all sorts of stuff.

So it it's kind of like a crowd source.

A.

I only it's not artificial.

It's like actual intelligence now.

Aesthetics aluminum.

It's hard to find bare aluminum pieces.

I mentioned it in another video.

I am a sucker for raw materials.

Raw metal, raw gold look, raw aluminum.

Raul tight.

I just liked the look of raw unrefined, an unpolished, and that's kind of what you sort of have here.

Although it's sort of a bead blast on this cooler, it's not brushed.

But yes, um, can furred polished edges here, Um, champers, however they're called.

But cases that's hard because everyone's just use a steel in a powder coat So we've actually had this case sitting here in the studio for months.

Cooler masters.

Pretty pissed.

I didn't use it.

So this is the perfect opportunity, because this is an aluminum case.

Okay, so this is gonna be a little bit of a mini review on the SL 600.

I have this thing like, I don't like reviewing cases.

Stand alone.

We are going to be reviewing some cases around here like a new mess if I were going to take a look at it like it is, but I like to do builds with cases because that's how you truly get a sense of what's what.

That's how you truly figure out where the shortcomings are.

I mean, we could look at it theoretically and be like, Yeah, this and yeah, that.

But it takes our building in it.

You may not find where the shortcomings are, So tell me this wasn't the right case for this.

Now you might be looking at this going, but J solid panels and solid cases.

They're terrible for airflow.

Not when you got to 200 millimeter fans pulling in there from the bottom.

Folks, look at that.

So the design in terms of the the cooling on this, it's very similar to how heat rises, right?

She got to 200 millimeter fans on the bottom pulling air or pushing air up, which is the natural rise of heat to go out the top.

Which is why the top of this is nothing but one big event.

You could take these 200 millimeter fans out if you want, and then you can replace them obviously with fans on the bottom and put the radiator on this side.

So not that I want to use this guy because I think it's gonna be too big.

But and the motherboard still fits if you really is this guy.

So I think I'm gonna be using the X 4 70 crosshair hero motherboard.

I was really debating.

Do I want to do thread Ripper or not?

And I think to truly showcase like where the value has always been, is the rise in is what really forced Intel's hand at bringing more course to mainstream.

Going with rise in mainstream on the X 4 70 would just kind of be like paying respects to that achievement that he and he got so no OMG sponsor on this.

This is on me.

I swear I'm saying this out of my own.

The only my own little soft spot for MD member.

I started this channel with an MD built, so we're gonna be using this in effect.

Now, if you want to know the full specs and stuff of this, you're gonna have to go to the build dot G website so you can see all of that rather than me listening down here.

You can go there and check it out.

Ah, What?

You just look at it, All right?

So let's just sort of start to get a little bit of a preliminary look at how it's gonna be.

Alright.

So see if this looks like it's going to stick this in there Hello, And that's before I've even really done anything so that could even mount like along the bottom.

That's kind of looking dope.

Like I said, I could go with a thinner radiator still to give me more room here and with the power supply, because the power supply mounts right here.

There's also a pump not right.

They're pumping out here putting out there, So I could go with another pump mounted.

I'm excited about the idea of doing a horizontal pump and reservoir like this.

I've never really done a horizontal one.

I've always kind of wanted to.

I've seen people do builds, and I think they look really good when they're done.

I've just never personally done one of those, so I think it's gonna look really good.

I'm probably gonna end up going also with a slim 360 for the top and the bottom.

So I'm just saying, like, how much room?

I would have, like, five mounted anything on the inside, but I don't want to cover up with the V A M and stuff.

We still need some airflow over those so we don't want unnecessary, like, insulate them, you know?

I mean, so yeah, I can take because I was gonna use thes rgb Vardar fans because they move such a good amount of air and they're still fairly quiet.

So the fans will go up top radiator will go underneath, which is good, because we like I said, we can't really pass the fittings through on this anyway, because if I tilt this and show you, there's no way to get the tubes through there so the fans have to go on the topside, which kind of sucks, because then the RGB aspect of the fans won't really be seen directly, but they will kind of have some glow on the top because we're thinking red is the accent color we need, but this black silver and red.

So I've had this velocity water block this aim the one because for whatever reason, they sell them independently.

Intel and Andy.

So I think I'll use this one I've not seen like a bare metal one.

Not to mention what we wouldn't find an aluminum one anyway.

Like they do have a full nickel.

But it's too shiny for this.

Like, I don't think that would work so well.

So one of the things that you can do to really tie a bill together obviously is custom sleeves.

Now.

That's kind of how cable mod sort of started cable markets in the name.

Most of the bills you see me do over the last year, year and 1/2 have been using their sleeves.

The gold bill was capable of the gold turned out absolutely beautiful, so I don't have any those cables yet?

I said to order them samples.

We got samples right here.

Ladies and gentlemen, you want your samples?

We got samples.

It's nice about this sample that they gave me here is they actually have the pro cord underneath it.

I know.

If you know this, the color of the cable underneath will affect the way the sleeping looks.

It's a black cable.

It will look very different than if it's a white one like this in the program, they use white cables.

I believe that much thicker gauge.

Yeah, let's silver and red for sure letters or guns or to make up for that right, silver and red.

And then we'll play around with it on the configuration.

Cable might also has their online configuration, and that's how I make all of my cable's.

Um, I go in there and I use their You tell it which cables you want.

24 Penn A.

Penn ups for peanut.

This one's got a pin in a four pin, so I've got to do both bows.

So yeah, we'll play around it on the configuration.

Er and then the cables that we create are the ones they make and shipped to us.

So I think I'm gonna go ahead, install the block.

I'd love to go farther on this bill tonight.

Today, too.

But I can't because I don't have the radiators.

Remember?

We went through that with the other one.

And then it was the wrong one again.

Yep.

Story of my life.

So I started kind of putting some of the aluminum pieces back together.

And the nice thing about the tinted side panels when you turn it off, that kind of blacks out and then we turn it on.

Of course, it'll light up.

We'll be adding RGB lighting and stuff to this.

Obviously, there's some things I need to do this build.

I know you guys hate multi partners, but I had no choice on this one.

I want you guys to be involved in.

So please do me a favor.

Go to the link inscription below, mention it.

Multiple times.

This is going up on builds, doggie.

And that's where the comments should be on ideas on how we should do this.

This particular built we have a pump mount here, pumping out here.

Nowhere is it big enough for the radiator or the reservoir.

So it's gonna have to go horizontal like this.

Pretty sure I'm gonna get I'm gonna ditch this a 50 or 60 mil something that I'm gonna go with the thin because I want to do one of top and one on the bottom.

So that will give me 23 60 rads, which would be more than enough cooling for a single rise in and our already on seven.

Part of that, too, is I need to fill this area here with some tubing.

Obviously, this is this looks very bottom heavy, which is good.

I mean, that's gonna make it much more balanced.

I'm glad I have the shorter reservoir for this guy here because it fits you perfectly.

I'm gonna also see if maybe simulated computers will send me one of their silver covers for the pump.

And I don't think there's a way I can make an aluminum cover for this.

Like, kind of like they did with the wood one we did for Post Malone.

I don't know what to see.

I know some people that makes them custom stuff.

Joe, I know you're watching Text me.

I know more than one Joseph are gonna get a few texts.

But anyway, for the Ram to I'm thinking I might go with the Dominator.

Siri's again because they have the silver tops that will all tie in.

We'll have some more silver right here.

And then, of course, with the custom cable mont cables, the silver with red accent for sure, maybe a single black.

I don't know.

Phil made a good point.

The black just disappears in here because it's so black.

With all of the black parts in here, it'll just look like gaps rather than I think actually be able to tell that some sort of a cable.

All right, enough rambling.

You guys kind of saw the thought process that goes into when we do these build.

And I'm really looking forward to seeing what ideas you guys have.

Because I look at some of your user feedback and I look at some of your builds and it's like you guys give me credit of like, this was my first attempt and you gave me the courage and look at your building.

It's like, Dude, you're better than me.

What the hell?

What the hell, Of course!

Once again a huge thank you to cable mob for sponsoring today's video, and we will obviously document the process as we go on this and or even asked, No, it's not to give away this one's mind.

Giving away that ends the X T computer.

We talked about the one with the 20 i lightning's Ian there.

That one.

Dude, when did we get a lake across the street?