Name: 如何製作粘液(忍者龜滲液) (How to Make Slime (Ninja Turtle Ooze))
Uploaded: 2021-01-14T04:41:11.000Z
Duration: 4 min 17 s
Description: 【看影片學英語】數萬部 YouTube 影片，搭配英漢字典即點即查，輕鬆掌握單字發音與用法，長久累積看電影不必再看字幕。

Hey look at this!  There's a broken canister of

mutant ooze leaking down into the sewers.  I got a

程度副詞

little too close, and this mysterious goo is all over

my hands now.  But don't worry because this sticky

slime is non-toxic, and it's so easy to make a 3 year

All you need for this project are some common

household items you probably already have.  A little

Borax detergent booster, yellow and green food

coloring, and a 5 oz bottle of some clear non-toxic

school glue like this one.  First we'll need to

measure out 1 cup of water, and carefully add 1/2

teaspoon of Borax.  Stir that in as best you can, and

now we'll need a separate bowl to hold 1/2 cup of

water.  This is the part where you can take the lid off

your glue bottle and dump the entire thing in.  Stir

the glue and water together so you get a good mix,

and grab your food coloring because we're going to

use 2 drops of green, and 5 drops of yellow.  The

yellow is going give this a slimy yellow-green look,

so stir it all together, but don't touch yet.  It's only

when you add the Borax mixture into the bowl that

the gelled ooze starts to form before your eyes.  You

can try and stir it together now, and what you're

going to find is a great green glob of flubber.  This

slime is so shiny, so stretchy, and so gooey and

green that it's nearly irresistible not to put it in your

mouth.  Luckily it's non-toxic and doesn't really taste

bad, but it's probably better if you kept it in your

hands.  When you can transfer your slime to a

different bowl, there will be a little water left over,

and that can be thrown away.  This stuff looks pretty

wet and sticky, and if you're not careful, it can get

everywhere, but if you dump it out on something like

a table and let it flatten out, the whole thing is firm

enough to pick up and flip over, like a pancake.

Because we used clear glue, the slime itself is

transparent, and when you hold it up in front of a

light, it resembles some kind of alien experiments.

That's kind of creepy.  We're going to need a way to

store our slime, and I tried putting it back in the glue

bottle, but this old Play-doh container is much

better.  One batch actually filled both these

containers.  But I want a canister that stands out.

This looks like it should work.  It's just a couple of 2"

ABS clean out adaptors and plugs from the

hardware store, and some left over acrylic tubing.  If

you want to make this at home, there's a good

chance you don't have any acrylic, so I'm going to try

and imitate this with a clear 2L bottle.  First I'll need

to empty this bottle, and my wife really likes this

method.  Then after it's cleaned and dried I'm going

to grab some scissors.  I'm cutting off the bottom, the

side and top pieces so that I get this nice rectangle

sheet of plastic.  It naturally wants to roll up into a large

tube, so I'll use that to my advantage by placing

both ends inside the ABS adaptors, and letting it

expand.  I decided to use hot glue to try and hold

this overlapping bit together,  then remove the caps

and continue with the rest.  I'm just using the plugs

on the ends to keep the tube the right size as the

glue cools.  I also added some glue around the

edges to make it all a little stronger.  Now hot glue

can go on the ends, and the adaptors twisted on

overtop to ensure good contact with the glue,

making this an ooze-tight seal.  Well it's not as

perfect as a acrylic tube would be, but it's free!  Now

our slime can go inside, and when the cap is on, it's

actually looking pretty good!  The clear plastic

allows the ooze show through, and the ABS fittings

give it a more authentic look.  How do you think

your neighbors might react if they happened upon

something that looked like this?  Would they call the

police?  It's non-toxic and dissolves in water, so

should be pretty easy to clean up.  Just for fun, I

went to the dollar store and got some yellow glow

sticks to put inside.  I'll break them up to get the

chemicals mixing, and shake them until they glow.

When I push one of the rods into the center of the

ooze, it glows an eery green light.  One is enough,

but I'll try two and put the cap back on.  I like how

this is looking.  You can lay this glowing mutant

ooze down in dark corners and people will have a

hard time figuring out what it is.  Well that was a fun

project, and a favorite new toy.  If you like these

videos, click here to subscribe and select to be

notified when I upload my next one.  Hit the thumbs

up button, share with your friends.  I appreciate your