What I'm gonna do different in this tutorial is I'm going to use highlighters to

Emphasize and illustrate each crease so it's just gonna be a little bit easier

step-By-step for and maybe the first time or if you're new to do an origami so first you're gonna need either origami paper or

Printer paper that you can make into a square and which we want to do to do that is basically take

this corner and fold

It down

along that Edge and then take a pair of scissors and

Cut the excess paper off just like that

And then when you open it back up

You have a perfect square, and then this is going to be the first of your fold you're going to want to do

So I'll go ahead and illustrate this one

On the next slide this fold you're going to take the other corner and two

And fold it the other way

Just like that

And then now you want to flip it over

And you're going to fold it now into in half the other way

to basically two rectangles

And then you'll want to do it the other way as well

So now on this side

now have a folds basically going the other way and

Then once you get to this point. You're Gonna want to

Tilt it like that and these two folds right here

It's going to kind of naturally want to come together, and you want to fold along those edges and bring these two points

Inward down to the bottom and then when you do that at the top

Hold those crease down just like that, so then now you have the square basically. They're kind of like four

little triangular flanges coming out, and then you want to always keep the

flaps on the bottom

And then now for the next step

once you get that creased real good if you want to take this corner right here this edge and

Match along the center crease you have right here

basically just fold these in

And then once you do that flip it over and do the same thing on the other side

I'm going to go ahead and illustrate those for you and actually there's one more thing one. So you get those folded on both sides

And the step isn't necessary, but I like to do it as an extra

Step is when you take the top part right here

And give it just a little bit of a crease on top and that'll help help guide a fold later on

Then you want to go ahead and open up all four sides. I'm going to illustrate all these for you

You'll fold their fold and fold

down

Right there and the crease we did

Right on top and so now

Go ahead and illustrate the unit side

fold

Just like that, so you have folded like this

And when you did that also full of the inside which then what you want to do is take this bottom flap?

and push it up and

Crease it right there where this fold is and then on the two inside creases basically fold those in

Crease the bottom and then just kind of let this fall together

into a crease just like that and then flip it over and

Do the same thing and then you're gonna want to take this and Kinda. Just give it a little bit of crease the other way

And open it up now along these two folds right here. Oh

Fold those in and let this all just kind of fall together. Just like that crease it real good

And once you have that you'll see the split part down at the bottom. I'm gonna keep that there and

now what you're going to want to do is take the

Corner Edges and this right here and fold it in to the center. Just like this

get on both sides

It looks just like that

Then fold it up. I'll flip it over and do the same two folds just

Like that so it looks like that

Well, then now you don't want to take

the two flaps

pinch them together

At the same time pinch the other two together, so you're basically just

inverting what you have and

You'll get what looks like this and then from there look I already see a little bit of a crease right here

Go on to fold up

these parts on both sides flip it over fold it up there at the bottom and

then now

Basically invert it again so pinch these two together and pinch the back two together just

Like that so then you'll get this and then down at the bottom fold these over to get your wings

Same thing on the other side

And now you can see you have the wings and the last second last step we want to take these and along this edge

right here, basically just kind of pull them out and

Then pinch it and refold it right along that edge

Same thing on this side

then last step I'm gonna take the four the head basically push this down and

pinch it in

Just like that and there you have it you have a origami Crane