they had a matte black glass version of the OnePlus 6.

And they used a corrosion method to matte-ify that back glass.

So I asked them, I was like, hey OnePlus, how about you let me have one of those matte

black glass versions so I can take it apart on my channel and show what that abrasion

looks like...that corrosion layer.

And after we analyze that back glass from the inside, and see what that abrasion or

corrosion looks like, we give it away to one of you guys.

Luckily they said yes, so let's get started.

[Intro]

I have all three colors here for comparison.

The Mirror Black on the right with its super shiny reflective surface, and the Midnight

Black or the matte black here in the center.

The Midnight almost has a metallic look to it I feel like, looking like anodized aluminum,

but feeling like smooth glass with a very unique tornado swirl in the center that changes

with reflection.

The Silk White version also has more of a matte look to it, but with gold accents along

the fingerprint scanner and the sides.

I think the Midnight looks pretty awesome, but all 3 are definitely unique.

OnePlus said they use a special form of corrosion directly on the underside of the glass to

carefully create countless tiny holes.

I think it might just be a layer of opaque plastic laminate, but there's only one way

to know for sure, and that's from the inside.

I won't bore you with all the details since we've done this once with the Mirror Black

OnePlus 6.

So long story short: heat softens the adhesive, glass is glass so I'm being careful, and it

only takes a few minutes to remove the panel.

I've done this a lot though.

One last slice through the top adhesive and the back glass panel is released, exposing

the non-red battery and our super long fingerprint scanning ribbon.

The underside of the glass is looking pretty familiar so far, compared with the Mirror

Black, but we'll see what happens when I start peeling off the thin layer of film.

The fingerprint scanner, camera lens, and LED flash diffuser are all removed, and now

it's time for the good stuff: scraping and peeling off the under layer.

Once I get a good enough grip on the film, it will peel off in larger chunks, and it

doesn't take too long to realize that the frosted effect from the corrosion that OnePlus

was talking about is indeed built straight into the glass.

There is no other plastic layer on the surface.

It looks pretty cool and impressive that the effect was applied directly to the glass.

It should make for an interesting clear phone for one of you guys to keep.

I'll lift up a larger chunk of film and start peeling that off.

You can see as I flip back and forth with the glass and laminate how opaque the thing

really is.

It's interesting how many different things can be done with glass.

I imagine OnePlus obtained this effect with some kind of acid etching solution.

You can buy etching cream on Amazon for pretty cheap that will replicate this same effect

on any piece of glass for about 10 dollars.

People use this cream to etch designs or logos into windows or mirrors, or I guess you could

even use it on your own phone if you really wanted to.

Finally the glass is clear.

The OnePlus logo remains unetched, which is kind of fun.

It was probably a piece of vinyl that was removed after the cream was washed off.

It's the only part of the glass that is still totally see-through.

OnePlus would save me a step if they just made the battery red.

But luckily when I asked dbrand for some red skins, they sent me way more than I needed.

Either dbrand was feeling generous for a second, or they can't count real good.

I'm not sure.

Either way, I'm not complaining.

The battery is now red and the phone is ready for the double sided tape.

I've had a ton of people ask me where I buy this stuff, so I'll link it in the video description

along with the tools I use.

The glass is now clean with the camera lens back into place, along with the little flash

and the fingerprint scanner.

I have a feeling this is going to look pretty sweet.

So far the phone's turning out pretty well.

I have my totally clear OnePlus 6 for reference against this frosted glass version, once it's

finished.

The super long fingerprint scanner is clipped in and glass set down into place.

And the giveaway phone is complete.

Which one do you prefer?

The frosted glass on the left cuts down on glare and visible fingerprints, and it also

has a way more subtle OnePlus logo in the center...more of a phantom logo which can

only be seen in certain lighting.

I'm a fan.

But then the totally clear OnePlus is, you know, totally clear.

Let me know down in the comments which one you prefer.

To enter into the giveaway is pretty easy.

Just come follow me and OnePlus on Instagram.

I'll leave links in the video description.

And leave a comment on my frosted OnePlus picture.

I'll pick the winner in a few days.

Best of luck on the giveaway.

I'm excited to hang out with you over on Instagram.

And thanks a ton for watching.

I'll see you around.